Cisco Access Point AIR-AP1815W-H-K9C AIR-AP1815W-Q-K9C dual Band Aironet 1815w 802.11ac Wave 2 AIR-AP1815w-x-K9C

The Aironet® 1815w Access Point offers a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls, or other multiple-dwelling-unit deployments. Packing 802.11ac Wave 2 wireless standards support and Gigabit Ethernet wired connectivity into a sleek device, the 1815w is built to take full advantage of existing cabling infrastructure while blending into the visual footprint. This combination provides best-in-class performance while reducing total cost of
ownership.

Increased wireless performance
The Aironet 1815w access point supports the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks. With simultaneous dual radios and dual band with 802.11ac Wave 2 MU-MIMO functionality, this access point can handle the increasing number of high-bandwidth devices that will soon become a common part of the network.
Wired access
The 1815w allows wired access via a single RJ-45 10/100/1000 auto detection port. It supports full operation modes using PoE 802.3af power. The 1815w comes with three local Gigabit Ethernet ports, one uplink Gigabit Ethernet port, and one passive pass-through RJ-45 port, allowing for a variety of connections.

Item		Specification
Authentication and security		● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 3 (WPA3), WPA2, WPA ● 802.1X, RADIUS Authentication, Authorization and Accounting (AAA) ● 802.11r ● 802.11i
Software		● Cis Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4.100.0/84 CCO or later ● Cis Mobility Express
Supported WLAN controllers		● Cis 2500 Series Wireless Controllers, Cis 3500 Series Wireless Controllers, Cis Wireless Controller Module for ISR G2, Cis Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cis 5500 Series Wireless Controllers, Cis Flex ® 7500 Series Wireless Controllers, Cis 8500 Series Wireless Controllers, Cis Catalyst ® 9800 Series Wireless Controllers ● Cis Mobility Express
Maximum clients		● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac		● 2x2 single-user/multiuser MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support
Ethernet ports		● Authentication with 802.1X or MAC filtered ● Dynamic VLAN or per port ● Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)		● Integrated Bluetooth 4.1 (including BLE) radio ● Maximum transmit power: 4 dBm ● Antenna gain: 2 dBi
Integrated antennas	● 2.4 GHz, gain 2 dBi ● 5 GHz, gain 3 dBi
Interfaces	● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) ● Management console port (4-pin connector) ● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: ◦ PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af ● One passive pass-through port RJ-45 (back to bottom)
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions(W x L x H)	● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)
Weight	● Access point without mounting bracket or any other accessories: 10 oz (280 g)
System	● 1 GB DRAM ● 256 MB flash ● 710 MHz quad-core
Powering options	● 802.3af/at Ethernet switch ● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw	● 8.5W (maximum, without PoE out)
Physical security	● Torx security screw, included with the access point ● Kensington lock slot to lock device to mounting bracket.
Mounting	● Included with the access point: mounting bracket AIR-AP-BRACKET-W3
Accessories	● Mounting bracket: AIR-AP-BRACKET-W3= (available as spare) ● Spacer kit: AIR-AP1815W-KIT= (sold separately), includes spacer and RJ-45 jumper cable ● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 20 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports

Shenzhen Bo-Net Technology Co., Ltd is the leading global supplier of quality used&new Cisco equipments and based in Shenzhen,China.Our primary focus is selling and buying Cisco router,switch,firewall,supervisor engine,module,transceiver and VOIP devices.

Since 2008,we have been establishing good cooperation with many companies from over 30 countries and win a high reputation.We are always ready and waiting for any of your questions or inquiries. And adhering to the principle of “Win-Win and Common Development “, we are looking forward to establishing long-term, stable and cooperative relationship with you.